Shop

  • Filters
  • Sort by
    ...
  • SB01 Low VOC Mixing Clear $31.60$126.40

    SB01 Low VOC Mixing Clear is an additive included in the R-M ONYX HD Low VOC Productive System. The low VOC basecoat system is an advanced system that provides similar drying properties of solventborne basecoats.

  • DH16 Hardener- Slow Hardener $35.60$458.24

    R-M Diamont DH16 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature 70°F – 85°F

  • DH14 Hardener- Standard Hardener $35.60$458.24

    R-M Diamont DH14 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature: Below 70°F

  • DH18 Hardener- Super Slow Hardener $35.60$458.24

    R-M Diamont DH18 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature: Above 85°F

  • SEM Chip Guard – Clear $37.99

    SEM Chip Guard protects vulnerable lower panels from chipping and corrosion. Spray patterns may be varied to match factory textures.

  • Matador Clear $45.95$183.95

    Matador Clearcoat exhibits excellent gloss and DOI (Distinctness of Image). It is ideal for spot and panel repairs and provides fast build in two coats.

    ONLY Compatible With:

    Matador Activator

  • PB2 Hardener- Hardener for Clearcoat $50.56$202.24

    Required, used as a catalyst. It also insures durability and helps to achieve a high gloss. ***SLOW available temps 80+ degrees***

  • HB002- Hydrobase $59.20$236.80

    HB002- Hydrobase is used in every formula when mixing paint with the RM Onyx paint system. Hydrobase is the chemical that is responsible for making the Onyx toner waterborne.

  • DH 46 Normal Hardener $63.20$252.80
  • AM960- Spot Blender – 10.6 oz. $69.53

    AM960 is a 1K aerosol spot blender that provides a smooth edge of the clearcoat repair area. AM960 is a intergral tool for quickly repairing damaged areas up to 1.5″ in diameter.

  • DH100 Low VOC Hardener $73.60$294.40

    DH100 Low VOC Hardener is the basecoat hardener used in the R-M ONYX HD Low VOC Productive System. The low VOC basecoat system is an advanced system that provides similar drying properties of solventborne basecoats.

    Do not use any other hardener.

  • Evercoat Rage Gold Body Filler $75.95$208.95

    Evercoat’s easiest sanding body filler. The unsurpassed sanding qualities are attributed to Hattonite, a unique ingredient which reduces heat and friction created by aggressive sanding. Rage Gold also contains ZNX-7 for adhesion to galvanized steel and aluminum. Plus, it’s stain resistant for use with basecoat/clearcoat paints. Part of the MetalWorks System. Blue cream hardener included.

  • Evercoat Glazing Putty 20 oz. & Hardener .75 oz. $78.95

    The original polyester glazing putty. Can be applied directly to bare metal, body filler, fiberglass, and fully cured sanded topcoats. Easily fills grind marks, pinholes, low spots, and other minor imperfections. Contains ZNX-7™ for superior adhesion to galvanized steel, bare steel, aluminum, SMC, E-Coat and OEM finishes. No shrinkage. Easy dry. Reduces the risk of staining. Cream hardener included.

    item # 100400

  • Matador Clear Kit $265.00

    Matador Clearcoat exhibits excellent gloss and DOI (Distinctness of Image). It is ideal for spot and panel repairs and provides fast build in two coats.

    This kit consists of a gallon of Matador Clear and a Quart of Matador Activator.

ALL PRODUCTS LOADED !

My Cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Product
Compare Product
Compare Product
Compare Product
Categories