8 oz.

  • Filters
  • Sort by
  • DC92 High Solids Clear $22.40$358.40
  • DH 46 Normal Hardener $63.20$252.80
  • 900 Pre Kleano- Surface Prep $6.40$102.40

    R-M 900 Pre-Kleano is a solvant cleaner that is designed to remove silicone, wax, grease, road tar, and oils. It is recommended to use this product to clean/prep an area before you begin painting. Pre-Kleano will slightly penetrate existing paint for good adhesion for the following paint coats.

  • 910 Prep Cleaner $7.20$115.20

    R-M 910 Prep Cleaner solution will remove light contamination from existing paint films, and clean sanded OEM finishes, enabling good adhesion of subsequent coats. R-M 910 can be used for unpainted automotive plastic parts and/or gel-coated fiberglass and can be used as anti-static pretreatment before adhesion promoter application, primer or topcoat application.

  • LP600 Primer- Spot Primer $8.80$140.80

    Limco 600 1K Gray Acrylic Primer is a non-settling, fast-drying, easy sanding, flexible primer that meets the U.S. National Rule and provides excellent adhesion plus good color hold-out.

  • UBR200 Blending Solvent- Spot Blender $28.40$119.99

    Diamont UBR200 Universal Blending Solvent was developed specifically to allow you to blend in an area of clear over a small repair.

  • PB Clean-A-Bull $6.00$96.00

    Solvent based cleaner used to remove any comtaminants from surfaces to be painted and to promote good adhesion.

  • DH100 Low VOC Hardener $73.60$294.40

    DH100 Low VOC Hardener is the basecoat hardener used in the R-M ONYX HD Low VOC Productive System. The low VOC basecoat system is an advanced system that provides similar drying properties of solventborne basecoats.

    Do not use any other hardener.

  • Matador Clear $45.95$183.95

    Matador Clearcoat exhibits excellent gloss and DOI (Distinctness of Image). It is ideal for spot and panel repairs and provides fast build in two coats.

    ONLY Compatible With:

    Matador Activator

  • Evercoat Rage Gold Body Filler $75.95$208.95

    Evercoat’s easiest sanding body filler. The unsurpassed sanding qualities are attributed to Hattonite, a unique ingredient which reduces heat and friction created by aggressive sanding. Rage Gold also contains ZNX-7 for adhesion to galvanized steel and aluminum. Plus, it’s stain resistant for use with basecoat/clearcoat paints. Part of the MetalWorks System. Blue cream hardener included.

  • Matador Activator $27.95$88.95

    Matador Activator is used as the hardener for our Matador Clear. **Choose slow for 80+ degree temperatures.**

  • PB1 Reducer- Paint Reducer $12.80$204.80

    Reducer/thinner for basecoats, so they are more sprayable (works fast) ***SLOW available for temps 80+ degrees***

  • PB2 Blender $11.60$185.60

    Used to blend and dry edges left from spraying clearcoat in MicroPatch. When used correctly it will produce an invisble repair. PB2 Blender is very thin and should be sprayed quickly and lightly to avoid runs.

  • PB2 Clear- Clearcoat $25.12$401.92

    High End clearcoat, protective for basecoat. Non-pigmented paint used as a topcoat for basecoats colors when doing Micropatch. PB2 Clear is ideally suited as a repair clear, has high mechanical and chemical resistance and is a high solids product.

    PB2 Clear is mixed with PB2 Hardener and PB2 Reducer to produce a clear coat.

    When mixed it has a pot life of 60- 90 minutes so equipment should be cleaned thoroughly after each use.

    ONLY Compatible With:


    PB2 Hardener

    PB2 Reducer 

  • PB2 Hardener- Hardener for Clearcoat $50.56$202.24

    Required, used as a catalyst. It also insures durability and helps to achieve a high gloss. ***SLOW available temps 80+ degrees***

  • PB2 Reducer- Reducer for Clearcoat $12.80$204.80

    Used to thin clearcoats and primers to make them more sprayable and dry faster.

  • Prime-A-Bull $19.80$316.80

    (Grey) 1K primer/sealer (one-step- no need for catalyst/hardener)

  • PB Remove A Bull H.S. $8.95$67.95

    Remove A Bull H.S. is a liquid product used to remove excess paint around chips or scratches when doing touch up that will not damage the underlying paint. Remove-A-Bull will leave the vehicle with a high gloss and will not scratch.

My Cart
Close Wishlist
Close Recently Viewed