Shop

  • Filters
  • Sort by
    ...
  • PB Remove A Bull H.S. $8.95$67.95

    Remove A Bull H.S. is a liquid product used to remove excess paint around chips or scratches when doing touch up that will not damage the underlying paint. Remove-A-Bull will leave the vehicle with a high gloss and will not scratch.

  • AM800 Spot Primer- Gray – 11.3 oz. $29.49

    AM800 Spot Prime is a 1K, fast drying, easy sanding primer that provides excellent adhesion plus good color hold-out. AM800 can be applied over cured, cleaned and sanded paint finishes and bare steel.

  • Power Gel – 20 gram $10.50

    Power Gel is a thick cyanoacrylate adhesive. Recommended to be used where maximum filling or heavy texture is required. Can also be used to fix vinyl in areas where flexibility is not essential or for thin vinyl where heat can not be used. For example, cracks in armrests, dashes, door panels or console covers.

  • BASF UR50 Reducer- Standard Reducer $6.80$108.80

    Diamont UR50 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: 68°F to 80°F

  • DC01NB Energy Saving Speed Clear $22.40$358.40

    DC01NB Energy Saving Speed Clear is a Super Fast, no-bake, two-component acrylic urethane clear.
    DC01NB flash time between coats is 3-5 minutes and it can be buffed after 15-30 minutes under air-dry conditions.

    DC01NB Clear produces a high gloss, durable automotive finish that is recommended for spot repair and up to 3-panel repairs for top coating Diamont and ONYX HD basecoat colors.

    DC01NB Clear can be used with any of the DH hardeners found in the Hardener section.

     

    Mixing Ratio is 3:1:15%

  • DH14 Hardener- Standard Hardener $35.60$458.24

    R-M Diamont DH14 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature: Below 70°F

  • Paint Bull Express Clear $17.60$140.80
    Exclusive Paint Bull Express Clear is priced low but competes with some of the most expensive clear coats on the market This clear is designed for blending and spot panel repairs while leaving a fantastic finish behind.  
     
    The Express Clear uses the same Standard Reducer and Standard Hardener used with most clear coats we already stock.  Because it works with the current line of reducer and hardener you can adjust it to any climate, hot or cold.
  • Waterless Wash $4.95$15.95

    Paint Bull’s Waterless Wash is ready to use and is perfect any time of year even in the freezing cold winter months, it doesn’t freeze on the panels of the vehicle.  Waterless Wash can be used prior to starting a repair by cleaning off the dirt and dust for the panel.  It can also be used after you have completed a touch-up repair to remove the residue left behind from the Remove-A-Bull HS or other overspray removers.

  • UBR200 Blending Solvent- Spot Blender $28.40$119.99

    Diamont UBR200 Universal Blending Solvent was developed specifically to allow you to blend in an area of clear over a small repair.

  • XXX Gun Cleaner – Universal $13.49

    XXX Gun Cleaner is a heavy-duty cleaning solvent and paint gun cleaner made by SEM. 77743 is also strong enough for removing grease, adhesives, dirt, grime, paint overspray and for cleaning spray equipment. XXX is not recommended for use on plastic or painted surfaces as it may soften and discolor.

  • 900 Pre Kleano- Surface Prep $6.40$102.40

    R-M 900 Pre-Kleano is a solvant cleaner that is designed to remove silicone, wax, grease, road tar, and oils. It is recommended to use this product to clean/prep an area before you begin painting. Pre-Kleano will slightly penetrate existing paint for good adhesion for the following paint coats.

  • Thinner $6.35$29.99

    General purpose laquer thinner is recommended to be used to clean up tools and paint equipment.

  • HB002- Hydrobase $59.20$236.80

    HB002- Hydrobase is used in every formula when mixing paint with the RM Onyx paint system. Hydrobase is the chemical that is responsible for making the Onyx toner waterborne.

  • DH16 Hardener- Slow Hardener $35.60$458.24

    R-M Diamont DH16 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature 70°F – 85°F

  • Putty Spreader $0.89

    Yellow plastic putty spreader.

  • Naked Gun – Spray Gun Paint Remover $11.95

    Naked Gun® Spray Gun Paint Remover provides a powerful aerosol spray stream that removes both solvent and waterborne paints from hard to reach areas.  There is no need for special equipment or time-consuming dipping, thereby reducing cost.  Removes paint from spray gun bodies, tips, and cups, as well as many other shop surfaces.  Meets national VOC regulations.

  • BASF UR40 Reducer- Fast Reducer $6.40$102.40

    Diamont UR40 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: 50ºF – 68ºF

  • LC4100- High Solids Clear (Standard Clear) $8.80$140.80

    Limco LC4100 High Solids Clearcoat is a U.S. National Rule Compliant acrylic urethane clear for use over basecoat colors. It is designed to increase the profitability and productivity. LC4100 is an easy-to-apply two-coat clear that has excellent gloss and leveling. LC4100 offers a range of reducers to meet your all temperature needs.

    Mixing ratio 4:1:1

My Cart
Close Wishlist
Close Recently Viewed
Categories