Shop

  • Filters
  • Sort by
    ...
  • DH18 Hardener- Super Slow Hardener $35.60$458.24

    R-M Diamont DH18 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature: Above 85°F

  • DH14 Hardener- Standard Hardener $35.60$458.24

    R-M Diamont DH14 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature: Below 70°F

  • DH16 Hardener- Slow Hardener $35.60$458.24

    R-M Diamont DH16 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature 70°F – 85°F

  • PB2 Clear- Clearcoat $25.12$401.92

    High End clearcoat, protective for basecoat. Non-pigmented paint used as a topcoat for basecoats colors when doing Micropatch. PB2 Clear is ideally suited as a repair clear, has high mechanical and chemical resistance and is a high solids product.

    PB2 Clear is mixed with PB2 Hardener and PB2 Reducer to produce a clear coat.

    When mixed it has a pot life of 60- 90 minutes so equipment should be cleaned thoroughly after each use.

    ONLY Compatible With:

     

    PB2 Hardener

    PB2 Reducer 

  • DC92 High Solids Clear $22.40$358.40
  • DC01NB Energy Saving Speed Clear $22.40$358.40

    DC01NB Energy Saving Speed Clear is a Super Fast, no-bake, two-component acrylic urethane clear.
    DC01NB flash time between coats is 3-5 minutes and it can be buffed after 15-30 minutes under air-dry conditions.

    DC01NB Clear produces a high gloss, durable automotive finish that is recommended for spot repair and up to 3-panel repairs for top coating Diamont and ONYX HD basecoat colors.

    DC01NB Clear can be used with any of the DH hardeners found in the Hardener section.

     

    Mixing Ratio is 3:1:15%

  • Prime-A-Bull $19.80$316.80

    (Grey) 1K primer/sealer (one-step- no need for catalyst/hardener)

  • DH100 Low VOC Hardener $73.60$294.40

    DH100 Low VOC Hardener is the basecoat hardener used in the R-M ONYX HD Low VOC Productive System. The low VOC basecoat system is an advanced system that provides similar drying properties of solventborne basecoats.

    Do not use any other hardener.

  • Matador Clear Kit $265.00

    Matador Clearcoat exhibits excellent gloss and DOI (Distinctness of Image). It is ideal for spot and panel repairs and provides fast build in two coats.

    This kit consists of a gallon of Matador Clear and a Quart of Matador Activator.

  • DH 46 Normal Hardener $63.20$252.80
  • HB002- Hydrobase $59.20$236.80

    HB002- Hydrobase is used in every formula when mixing paint with the RM Onyx paint system. Hydrobase is the chemical that is responsible for making the Onyx toner waterborne.

  • Evercoat Rage Gold Body Filler $75.95$208.95

    Evercoat’s easiest sanding body filler. The unsurpassed sanding qualities are attributed to Hattonite, a unique ingredient which reduces heat and friction created by aggressive sanding. Rage Gold also contains ZNX-7 for adhesion to galvanized steel and aluminum. Plus, it’s stain resistant for use with basecoat/clearcoat paints. Part of the MetalWorks System. Blue cream hardener included.

  • PB2 Reducer- Reducer for Clearcoat $12.80$204.80

    Used to thin clearcoats and primers to make them more sprayable and dry faster.

  • PB1 Reducer- Paint Reducer $12.80$204.80

    Reducer/thinner for basecoats, so they are more sprayable (works fast) ***SLOW available for temps 80+ degrees***

  • PB2 Hardener- Hardener for Clearcoat $50.56$202.24

    Required, used as a catalyst. It also insures durability and helps to achieve a high gloss. ***SLOW available temps 80+ degrees***

  • PB2 Blender $11.60$185.60

    Used to blend and dry edges left from spraying clearcoat in MicroPatch. When used correctly it will produce an invisble repair. PB2 Blender is very thin and should be sprayed quickly and lightly to avoid runs.

  • Matador Clear $45.95$183.95

    Matador Clearcoat exhibits excellent gloss and DOI (Distinctness of Image). It is ideal for spot and panel repairs and provides fast build in two coats.

    ONLY Compatible With:

    Matador Activator

  • LC4200- Low VOC Clear $10.80$172.80

    LC4200 Clearcoat is a low 250 gms/liter (2.1 lbs/gal) VOC acrylic urethane clearcoat for use over basecoat colors. LC4200 is easy to apply and has excellent gloss and leveling properties.  This is used primarily in areas such as California which require Low VOC products.

    ONLY Compatible With:

    LH604 Hardener

    VR29 Reducer

My Cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Product
Compare Product
Compare Product
Compare Product
Categories