Paint Bull provides a wide range of products to finish off your paint repair. Check out the different types of Clear Coats, Reducers, Hardeners, Activators, and Primers Paint Bull carries.

  • Filters
  • Sort by
    ...
  • DH18 Hardener- Super Slow Hardener $35.60$458.24

    R-M Diamont DH18 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature: Above 85°F

  • DH14 Hardener- Standard Hardener $35.60$458.24

    R-M Diamont DH14 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature: Below 70°F

  • DH16 Hardener- Slow Hardener $35.60$458.24

    R-M Diamont DH16 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature 70°F – 85°F

  • PB2 Clear- Clearcoat $25.12$401.92

    High End clearcoat, protective for basecoat. Non-pigmented paint used as a topcoat for basecoats colors when doing Micropatch. PB2 Clear is ideally suited as a repair clear, has high mechanical and chemical resistance and is a high solids product.

    PB2 Clear is mixed with PB2 Hardener and PB2 Reducer to produce a clear coat.

    When mixed it has a pot life of 60- 90 minutes so equipment should be cleaned thoroughly after each use.

    ONLY Compatible With:

     

    PB2 Hardener

    PB2 Reducer 

  • DC92 High Solids Clear $22.40$358.40
  • DC01NB Energy Saving Speed Clear $22.40$358.40

    DC01NB Energy Saving Speed Clear is a Super Fast, no-bake, two-component acrylic urethane clear.
    DC01NB flash time between coats is 3-5 minutes and it can be buffed after 15-30 minutes under air-dry conditions.

    DC01NB Clear produces a high gloss, durable automotive finish that is recommended for spot repair and up to 3-panel repairs for top coating Diamont and ONYX HD basecoat colors.

    DC01NB Clear can be used with any of the DH hardeners found in the Hardener section.

     

    Mixing Ratio is 3:1:15%

  • Prime-A-Bull $19.80$316.80

    (Grey) 1K primer/sealer (one-step- no need for catalyst/hardener)

  • Matador Clear Kit $265.00

    Matador Clearcoat exhibits excellent gloss and DOI (Distinctness of Image). It is ideal for spot and panel repairs and provides fast build in two coats.

    This kit consists of a gallon of Matador Clear and a Quart of Matador Activator.

  • DH 46 Normal Hardener $63.20$252.80
  • PB2 Reducer- Reducer for Clearcoat $12.80$204.80

    Used to thin clearcoats and primers to make them more sprayable and dry faster.

  • PB1 Reducer- Paint Reducer $12.80$204.80

    Reducer/thinner for basecoats, so they are more sprayable (works fast) ***SLOW available for temps 80+ degrees***

  • PB2 Hardener- Hardener for Clearcoat $50.56$202.24

    Required, used as a catalyst. It also insures durability and helps to achieve a high gloss. ***SLOW available temps 80+ degrees***

  • LC4200- Low VOC Clear $10.80$172.80

    LC4200 Clearcoat is a low 250 gms/liter (2.1 lbs/gal) VOC acrylic urethane clearcoat for use over basecoat colors. LC4200 is easy to apply and has excellent gloss and leveling properties.  This is used primarily in areas such as California which require Low VOC products.

    ONLY Compatible With:

    LH604 Hardener

    VR29 Reducer

  • LC4500 Express Clear $10.80$172.80

    LC4500 Express Clear is designed to increase the profitability and productivity of the repair facility. LC4500 is an easy to apply two coat clear that has excellent gloss and leveling.  LC4500 offers a range of reducers to meet your temperature needs.

    This clear is compatible with any of our DH hardeners and UR reducers.

     

    The mixing Ratio for this clear is 4:1:1/2

  • LP600 Primer- Spot Primer $8.80$140.80

    Limco 600 1K Gray Acrylic Primer is a non-settling, fast-drying, easy sanding, flexible primer that meets the U.S. National Rule and provides excellent adhesion plus good color hold-out.

  • LC4100- High Solids Clear (Standard Clear) $8.80$140.80

    Limco LC4100 High Solids Clearcoat is a U.S. National Rule Compliant acrylic urethane clear for use over basecoat colors. It is designed to increase the profitability and productivity. LC4100 is an easy-to-apply two-coat clear that has excellent gloss and leveling. LC4100 offers a range of reducers to meet your all temperature needs.

    Mixing ratio 4:1:1

  • VR0 Low VOC Basecoat Reducer $8.80$126.72

    VR0 Low VOC Reducer is the basecoat reducer used in the R-M ONYX HD Low VOC Productive System. The low VOC basecoat system is an advanced system that provides similar drying properties of solventborne basecoats.

    Do not use any other reducer.

  • UBR200 Blending Solvent- Spot Blender $28.40$119.99

    Diamont UBR200 Universal Blending Solvent was developed specifically to allow you to blend in an area of clear over a small repair.

My Cart
Close Wishlist
Close Recently Viewed
Categories