Paint Bull provides a wide range of products to finish off your paint repair. Check out the different types of Clear Coats, Reducers, Hardeners, Activators, and Primers Paint Bull carries.

  • Filters
  • Sort by
    ...
  • AM800 Spot Primer- Gray – 11.3 oz. $29.49

    AM800 Spot Prime is a 1K, fast drying, easy sanding primer that provides excellent adhesion plus good color hold-out. AM800 can be applied over cured, cleaned and sanded paint finishes and bare steel.

  • BASF UR50 Reducer- Standard Reducer $6.80$108.80

    Diamont UR50 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: 68°F to 80°F

  • DC01NB Energy Saving Speed Clear $22.40$358.40

    DC01NB Energy Saving Speed Clear is a Super Fast, no-bake, two-component acrylic urethane clear.
    DC01NB flash time between coats is 3-5 minutes and it can be buffed after 15-30 minutes under air-dry conditions.

    DC01NB Clear produces a high gloss, durable automotive finish that is recommended for spot repair and up to 3-panel repairs for top coating Diamont and ONYX HD basecoat colors.

    DC01NB Clear can be used with any of the DH hardeners found in the Hardener section.

     

    Mixing Ratio is 3:1:15%

  • DH14 Hardener- Standard Hardener $35.60$458.24

    R-M Diamont DH14 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature: Below 70°F

  • UBR200 Blending Solvent- Spot Blender $28.40$119.99

    Diamont UBR200 Universal Blending Solvent was developed specifically to allow you to blend in an area of clear over a small repair.

  • DH16 Hardener- Slow Hardener $35.60$458.24

    R-M Diamont DH16 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature 70°F – 85°F

  • BASF UR40 Reducer- Fast Reducer $6.40$102.40

    Diamont UR40 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: 50ºF – 68ºF

  • LC4100- High Solids Clear (Standard Clear) $8.80$140.80

    Limco LC4100 High Solids Clearcoat is a U.S. National Rule Compliant acrylic urethane clear for use over basecoat colors. It is designed to increase the profitability and productivity. LC4100 is an easy-to-apply two-coat clear that has excellent gloss and leveling. LC4100 offers a range of reducers to meet your all temperature needs.

    Mixing ratio 4:1:1

  • BASF UR60 Reducer- Slow Reducer $7.20$115.20

    Diamont UR50 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: 80°F to 100°F

  • VR0 Low VOC Basecoat Reducer $8.80$126.72

    VR0 Low VOC Reducer is the basecoat reducer used in the R-M ONYX HD Low VOC Productive System. The low VOC basecoat system is an advanced system that provides similar drying properties of solventborne basecoats.

    Do not use any other reducer.

  • 812 Fisheye Eliminator 2 oz. $10.26

    R-M 812 Fisheye eliminator is used in clearcoats only if fisheyes are encountered. Do NOT use Fisheye Eliminator in the basecoat colors. This product is used to reduce the effects of silicone contamination.

  • AM960- Spot Blender – 10.6 oz. $69.53

    AM960 is a 1K aerosol spot blender that provides a smooth edge of the clearcoat repair area. AM960 is a intergral tool for quickly repairing damaged areas up to 1.5″ in diameter.

  • DH 46 Normal Hardener $63.20$252.80
  • BASF UR30 Reducer- Super Fast Reducer $6.40$102.40

    Diamont UR30 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range- Below 50°F

  • LP600 Primer- Spot Primer $8.80$140.80

    Limco 600 1K Gray Acrylic Primer is a non-settling, fast-drying, easy sanding, flexible primer that meets the U.S. National Rule and provides excellent adhesion plus good color hold-out.

  • DH18 Hardener- Super Slow Hardener $35.60$458.24

    R-M Diamont DH18 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature: Above 85°F

  • LH604- Clearcoat Hardener $21.20$84.80

    LH604 hardener is used to make low VOC products crosslink into a hard, durable finish. The LH604 hardner is recommended for use with LC4200 Clearcoat.

  • LC4500 Express Clear $10.80$172.80

    LC4500 Express Clear is designed to increase the profitability and productivity of the repair facility. LC4500 is an easy to apply two coat clear that has excellent gloss and leveling.  LC4500 offers a range of reducers to meet your temperature needs.

    This clear is compatible with any of our DH hardeners and UR reducers.

     

    The mixing Ratio for this clear is 4:1:1/2

My Cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Product
Compare Product
Compare Product
Compare Product
Categories