Paint Bull provides a wide range of products to finish off your paint repair. Check out the different types of Clear Coats, Reducers, Hardeners, Activators, and Primers Paint Bull carries.

  • Filters
  • Sort by
    ...
  • BASF UR40 Reducer- Fast Reducer $6.40$102.40

    Diamont UR40 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: 50ºF – 68ºF

  • BASF UR30 Reducer- Super Fast Reducer $6.40$102.40

    Diamont UR30 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range- Below 50°F

  • BASF UR50 Reducer- Standard Reducer $6.80$108.80

    Diamont UR50 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: 68°F to 80°F

  • VR29- Ultra Low VOC Reducer $6.80$108.80

    VR29 is a Low VOC Reducer for use in meeting various Low VOC requirements. Used in low VOC applications, including LC4200 Clearcoat.

  • BASF UR60 Reducer- Slow Reducer $7.20$115.20

    Diamont UR50 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: 80°F to 100°F

  • BASF UR70 Reducer- Extra Slow Reducer $7.20$115.20

    Diamont UR70 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: Above 100°F

  • VR0 Low VOC Basecoat Reducer $8.80$126.72

    VR0 Low VOC Reducer is the basecoat reducer used in the R-M ONYX HD Low VOC Productive System. The low VOC basecoat system is an advanced system that provides similar drying properties of solventborne basecoats.

    Do not use any other reducer.

  • LC4100- High Solids Clear (Standard Clear) $8.80$140.80

    Limco LC4100 High Solids Clearcoat is a U.S. National Rule Compliant acrylic urethane clear for use over basecoat colors. It is designed to increase the profitability and productivity. LC4100 is an easy-to-apply two-coat clear that has excellent gloss and leveling. LC4100 offers a range of reducers to meet your all temperature needs.

    Mixing ratio 4:1:1

  • LP600 Primer- Spot Primer $8.80$140.80

    Limco 600 1K Gray Acrylic Primer is a non-settling, fast-drying, easy sanding, flexible primer that meets the U.S. National Rule and provides excellent adhesion plus good color hold-out.

  • 812 Fisheye Eliminator 2 oz. $10.26

    R-M 812 Fisheye eliminator is used in clearcoats only if fisheyes are encountered. Do NOT use Fisheye Eliminator in the basecoat colors. This product is used to reduce the effects of silicone contamination.

  • LC4500 Express Clear $10.80$172.80

    LC4500 Express Clear is designed to increase the profitability and productivity of the repair facility. LC4500 is an easy to apply two coat clear that has excellent gloss and leveling.  LC4500 offers a range of reducers to meet your temperature needs.

    This clear is compatible with any of our DH hardeners and UR reducers.

     

    The mixing Ratio for this clear is 4:1:1/2

  • LC4200- Low VOC Clear $10.80$172.80

    LC4200 Clearcoat is a low 250 gms/liter (2.1 lbs/gal) VOC acrylic urethane clearcoat for use over basecoat colors. LC4200 is easy to apply and has excellent gloss and leveling properties.  This is used primarily in areas such as California which require Low VOC products.

    ONLY Compatible With:

    LH604 Hardener

    VR29 Reducer

  • PB1 Reducer- Paint Reducer $12.80$204.80

    Reducer/thinner for basecoats, so they are more sprayable (works fast) ***SLOW available for temps 80+ degrees***

  • PB2 Reducer- Reducer for Clearcoat $12.80$204.80

    Used to thin clearcoats and primers to make them more sprayable and dry faster.

  • Paint Bull Express Clear $17.60$140.80
    Exclusive Paint Bull Express Clear is priced low but competes with some of the most expensive clear coats on the market This clear is designed for blending and spot panel repairs while leaving a fantastic finish behind.  
     
    The Express Clear uses the same Standard Reducer and Standard Hardener used with most clear coats we already stock.  Because it works with the current line of reducer and hardener you can adjust it to any climate, hot or cold.
  • Prime-A-Bull $19.80$316.80

    (Grey) 1K primer/sealer (one-step- no need for catalyst/hardener)

  • LH604- Clearcoat Hardener $21.20$84.80

    LH604 hardener is used to make low VOC products crosslink into a hard, durable finish. The LH604 hardner is recommended for use with LC4200 Clearcoat.

  • DC01NB Energy Saving Speed Clear $22.40$358.40

    DC01NB Energy Saving Speed Clear is a Super Fast, no-bake, two-component acrylic urethane clear.
    DC01NB flash time between coats is 3-5 minutes and it can be buffed after 15-30 minutes under air-dry conditions.

    DC01NB Clear produces a high gloss, durable automotive finish that is recommended for spot repair and up to 3-panel repairs for top coating Diamont and ONYX HD basecoat colors.

    DC01NB Clear can be used with any of the DH hardeners found in the Hardener section.

     

    Mixing Ratio is 3:1:15%

My Cart
Close Wishlist
Close Recently Viewed
Categories