• Filters
  • Sort by
    ...
  • DC01NB Energy Saving Speed Clear $22.40$358.40

    DC01NB Energy Saving Speed Clear is a Super Fast, no-bake, two-component acrylic urethane clear.
    DC01NB flash time between coats is 3-5 minutes and it can be buffed after 15-30 minutes under air-dry conditions.

    DC01NB Clear produces a high gloss, durable automotive finish that is recommended for spot repair and up to 3-panel repairs for top coating Diamont and ONYX HD basecoat colors.

    DC01NB Clear can be used with any of the DH hardeners found in the Hardener section.

     

    Mixing Ratio is 3:1:15%

  • LC4200- Low VOC Clear $10.80$172.80

    LC4200 Clearcoat is a low 250 gms/liter (2.1 lbs/gal) VOC acrylic urethane clearcoat for use over basecoat colors. LC4200 is easy to apply and has excellent gloss and leveling properties.  This is used primarily in areas such as California which require Low VOC products.

    ONLY Compatible With:

    LH604 Hardener

    VR29 Reducer

  • AM960- Spot Blender – 10.6 oz. $69.53

    AM960 is a 1K aerosol spot blender that provides a smooth edge of the clearcoat repair area. AM960 is a intergral tool for quickly repairing damaged areas up to 1.5″ in diameter.

  • BASF UR30 Reducer- Super Fast Reducer $6.40$102.40

    Diamont UR30 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range- Below 50°F

  • BASF UR40 Reducer- Fast Reducer $6.40$102.40

    Diamont UR40 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: 50ºF – 68ºF

  • BASF UR50 Reducer- Standard Reducer $6.80$108.80

    Diamont UR50 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: 68°F to 80°F

  • BASF UR60 Reducer- Slow Reducer $7.20$115.20

    Diamont UR50 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: 80°F to 100°F

  • BASF UR70 Reducer- Extra Slow Reducer $7.20$115.20

    Diamont UR70 is a Universal Spot and Panel Reducer which is recommended for use with Diamont Basecoat colors.

    Temperature Range: Above 100°F

  • DH14 Hardener- Standard Hardener $35.60$458.24

    R-M Diamont DH14 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature: Below 70°F

  • DH16 Hardener- Slow Hardener $35.60$458.24

    R-M Diamont DH16 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature 70°F – 85°F

  • DH18 Hardener- Super Slow Hardener $35.60$458.24

    R-M Diamont DH18 is a urethane catalyst which is used to make the topcoat crosslink to a hard, durable finish. Recommended to be used with LC4100 Clear.

    Suggested Temperature: Above 85°F

  • LH604- Clearcoat Hardener $21.20$84.80

    LH604 hardener is used to make low VOC products crosslink into a hard, durable finish. The LH604 hardner is recommended for use with LC4200 Clearcoat.

  • VR29- Ultra Low VOC Reducer $6.80$108.80

    VR29 is a Low VOC Reducer for use in meeting various Low VOC requirements. Used in low VOC applications, including LC4200 Clearcoat.

  • Jet95 Accelerator $23.20$92.80

    R-M Jet 95 Accelerator significantly decreases drying and curing time when added to your clear coat.

  • 812 Fisheye Eliminator 2 oz. $10.26

    R-M 812 Fisheye eliminator is used in clearcoats only if fisheyes are encountered. Do NOT use Fisheye Eliminator in the basecoat colors. This product is used to reduce the effects of silicone contamination.

ALL PRODUCTS LOADED !

My Cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Product
Compare Product
Compare Product
Compare Product
Categories