• Filters
  • Sort by
    ...
  • DC92 High Solids Clear $22.40$358.40
  • Paint Bull Aerosol Clear Coat Blender 11 oz. $19.99

    The Paint Bull Aerosol Blender will allow you to create a smooth and melted in blend in your clear coat finish when you are doing a panel or spot repair.

  • Paint Bull Express Clear $17.60$140.80
    Exclusive Paint Bull Express Clear is priced low but competes with some of the most expensive clear coats on the market This clear is designed for blending and spot panel repairs while leaving a fantastic finish behind.  
     
    The Express Clear uses the same Standard Reducer and Standard Hardener used with most clear coats we already stock.  Because it works with the current line of reducer and hardener you can adjust it to any climate, hot or cold.
  • Paint Bull Express Clear Sample Pack $16.20

    We are offering a try it size of the Paint Bull Express Clearcoat along with the reducer and hardener.

    Sample kit includes:
    8 oz. Paint Bull Express Clear Coat
    2 oz. RM Diamont DH 14 Hardener
    2 oz. RM Diamont UR 50 Reducer

  • UBR200 Blending Solvent- Spot Blender $28.40$119.99

    Diamont UBR200 Universal Blending Solvent was developed specifically to allow you to blend in an area of clear over a small repair.

  • Matador Clear $45.95$183.95

    Matador Clearcoat exhibits excellent gloss and DOI (Distinctness of Image). It is ideal for spot and panel repairs and provides fast build in two coats.

    ONLY Compatible With:

    Matador Activator

  • Matador Clear Kit $265.00

    Matador Clearcoat exhibits excellent gloss and DOI (Distinctness of Image). It is ideal for spot and panel repairs and provides fast build in two coats.

    This kit consists of a gallon of Matador Clear and a Quart of Matador Activator.

  • PB2 Clear- Clearcoat $25.12$401.92

    High End clearcoat, protective for basecoat. Non-pigmented paint used as a topcoat for basecoats colors when doing Micropatch. PB2 Clear is ideally suited as a repair clear, has high mechanical and chemical resistance and is a high solids product.

    PB2 Clear is mixed with PB2 Hardener and PB2 Reducer to produce a clear coat.

    When mixed it has a pot life of 60- 90 minutes so equipment should be cleaned thoroughly after each use.

    ONLY Compatible With:

     

    PB2 Hardener

    PB2 Reducer 

  • LC4100- High Solids Clear (Standard Clear) $8.80$140.80

    Limco LC4100 High Solids Clearcoat is a U.S. National Rule Compliant acrylic urethane clear for use over basecoat colors. It is designed to increase the profitability and productivity. LC4100 is an easy-to-apply two-coat clear that has excellent gloss and leveling. LC4100 offers a range of reducers to meet your all temperature needs.

    Mixing ratio 4:1:1

  • LC4500 Express Clear $10.80$172.80

    LC4500 Express Clear is designed to increase the profitability and productivity of the repair facility. LC4500 is an easy to apply two coat clear that has excellent gloss and leveling.  LC4500 offers a range of reducers to meet your temperature needs.

    This clear is compatible with any of our DH hardeners and UR reducers.

     

    The mixing Ratio for this clear is 4:1:1/2

  • DC01NB Energy Saving Speed Clear $22.40$358.40

    DC01NB Energy Saving Speed Clear is a Super Fast, no-bake, two-component acrylic urethane clear.
    DC01NB flash time between coats is 3-5 minutes and it can be buffed after 15-30 minutes under air-dry conditions.

    DC01NB Clear produces a high gloss, durable automotive finish that is recommended for spot repair and up to 3-panel repairs for top coating Diamont and ONYX HD basecoat colors.

    DC01NB Clear can be used with any of the DH hardeners found in the Hardener section.

     

    Mixing Ratio is 3:1:15%

  • LC4200- Low VOC Clear $10.80$172.80

    LC4200 Clearcoat is a low 250 gms/liter (2.1 lbs/gal) VOC acrylic urethane clearcoat for use over basecoat colors. LC4200 is easy to apply and has excellent gloss and leveling properties.  This is used primarily in areas such as California which require Low VOC products.

    ONLY Compatible With:

    LH604 Hardener

    VR29 Reducer

  • Evercoat Cut In Clear $51.98

    Ready-to-spray, 1k clearcoat engineered to provide 2k performance in an easy-to-use aerosol. Fast drying and great to use for small repairs, door jams, and trim work. Delivers a high gloss and depth and dries in 30 minutes.

  • AM960- Spot Blender – 10.6 oz. $69.53

    AM960 is a 1K aerosol spot blender that provides a smooth edge of the clearcoat repair area. AM960 is a intergral tool for quickly repairing damaged areas up to 1.5″ in diameter.

  • Jet95 Accelerator $23.20$92.80

    R-M Jet 95 Accelerator significantly decreases drying and curing time when added to your clear coat.

  • 812 Fisheye Eliminator 2 oz. $10.26

    R-M 812 Fisheye eliminator is used in clearcoats only if fisheyes are encountered. Do NOT use Fisheye Eliminator in the basecoat colors. This product is used to reduce the effects of silicone contamination.

My Cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Product
Compare Product
Compare Product
Compare Product
Categories