|
Includes
Primers,
Clear Coats,
Hardeners,
Reducers,
Remove-A-Bull,
Aerosols,
Thickeners
Clean-A-Bull is a solvent used to remove any contaminants from surfaces to be painted and promote good adhesion.
Available in 8 oz., quart or gallon size.
Reduces drying times. Follow directions, use cautiously/as directed. Too much - to brittle, to little - normal drying times.
4 oz. size
CM Thickener is used as a leveling agent added to the paint for ChipMaster touch-up.
Available in 4 oz. size.
Clean-Up Thinner is used to clean all equipment after use, and will dissolve left over paint and clear coat on the equipment.
Available in 8 oz. or gallon size.
Compound used with high speed buffer to eliminate wet sanding marks. Ideal for polishing minor clear coat scratches.
Available in 8 oz. or gallon size.
Matador Activator is used to activate our Matador Clear.
**Choose slow for 80+ degree temperatures.**
Available in 8 oz. or quart size.
Matador Clear is a medium solids product, 2K (mix with hardener), high production clearcoat, spot repair with exceptional durability.
Available in quart or gallon size.
Kit includes:
Matador Clear - Gallon
Matador Activator* - Quart
*Choose Slow for temperatures 80+ degrees.
Original Remove-A-Bull is a cream base liquid used to remove excess paint left around chips or scratches when doing touch-up. We recommend using Original Remove-A-Bull to remove tar, bugs, and aid in eliminating minor paint scuffs.
Available in an 8 oz. Bottle, 6 pack of 8 oz. Bottles, or Gallon Size.
PB1 Reducer is used to thin basislack paints so they are more sprayable. PB1 Reducer will also help set up metallic and micas in a defined orientation and speed up drying.
***Choose Slow for 80+ degree temperatures.***
Available in 8 oz., quart, or gallon size.
PB2 Blender is used to blend and dry edges left from spraying clear coat in MicroPatch. When used correctly will produce an invisible repair. PB2 Blender is very thin and should be sprayed quickly and lightly to avoid runs.
Available in 8 oz., quart, or gallon.
PB2 Clear is a non-pigmented paint used as a topcoat for basecoat colors when doing MicroPatch. PB2 Clear is ideally suited as a repair clear, has high mechanical and chemical resistance, and is a high solids product. PB2 Clear is mixed with PB2 Hardener and PB2 Reducer to produce a clear coat. When mixed it has a pot life of 60-90 minutes so equipment should be cleaned thoroughly after each use.
Available in 8 oz., quart or gallon size.
PB2 Hardener is used as a catalyst in PB2 Clear. It also insures durability and helps to achieve a high gloss.
**Choose slow for 80+ degree temperatures.**
Available in 8 oz. or quart size.
PB2 Reducer is used to thin PB2 Clear to make it more sprayable and dry faster.
Available in 8 oz., quart or gallon size.
Prime-A-Bull is our 1K sealer primer.
Available in an 8 oz bottle.
Sold individually or in a 6 pack.
Also available in gallon size.
Evercoat Putty & Hardener used for filling damage to metal or plastic.
Red Spot Putty is used in filling minor imperfections, such as pin holes.
Available in a 12 oz. tube.
Liquid used to remove excess paint left around chips or scratches when doing touch-up. Remove-A-Bull will leave vehicle with a high gloss and will not scratch.
Available in 8 oz., 6 pack, quart, or gallon size.
Shine-A-Bull is used to remove any excess Remove-A-Bull after the ChipMaster process. Used properly will produce a high gloss finish.
Gallon Size.
Sock-Eye Eliminator will help eliminate fish-eyes in paint caused by contamination.
Available in a 2 oz. Bottle
Swirl Remover may be used by hand or with a high speed buffer to eliminate swirls.
Available in 8 oz., quart or gallon size.
Chip Guard may be used to protect bottom panels of vehicles from chips. Chip Guard may also be used on interiors to texture hard plastic panels.
14.82 oz. aerosol can
Available in red or gray.
11.3 oz. aerosol can
Trim Black is a trim aerosol paint used to paint metal, such as wiper arms.
10.2 oz aerosol can
|
